Procedures for Removal and Installation of Cab Inner and Outer Parts Removal and Installation of Wiper Motor Items to prepare
AL
• Hexagon wrench (4 mm) • Wrenches (10 mm, 17 mm) • Box wrench (10 mm)
TE RN
• Flathead screwdriver (longnose pliers) • Phillips screwdriver
1. Removal of wiper motor
CO US N F E ID O E F N TS TI M AL GL : F O OR BA T L H
E
IN
[1] Use a wrench (10 mm) to remove the 3 bolts (1), and then remove the side lower trim (2).
[2] Use a flathead screwdriver or longnose pliers to remove the clip pins (3), and then remove ducts B (4).
[3] Use a Phillips screwdriver or box wrench (10 mm) to remove the 3 bolts (5). Use a hexagon wrench (4 mm) to remove the 3 bolts (6). Remove the front upper trim assembly (7).
WSM-13-17-005EN
391 14
