Removal and Installation of Wiper Controller

Items to prepare •Wrench (10 mm) •Box wrenches (10 mm, 13 mm) •Phillips screwdriver •Flathead screwdriver 1.Removal of wiper controller [1] Use the Phillips screwdriver to remove the 2 installation screws (2) for the side upper trim (1).

[2] Lift the side upper trim (1), remove the connectors (3), and then remove the side upper trim.

Some models have no connector.

[3] Use a box wrench (13 mm) to remove the 2 turn clips (4) and the 4 bolts (5), and then remove the side rear cover (6).

[4] Use the Phillips screwdriver or box wrench (10 mm) to remove the 4 bolts (7), and then remove the side rear B trim (8).

[5] Use a wrench (10 mm) to remove the 3 bolts (9), and then remove the side lower trim (10).

[6] Use the Phillips screwdriver or box wrench (10 mm) to remove the 4 bolts (11), and then remove the side rear A trim (12).

[7] Remove the connector (14) from the wiper controller (13).

[8] Use a flathead screwdriver to slightly bend the 4 installation clips (15), and then remove the wiper controller (13).

2.Installation of wiper controller

To install, perform the reverse of the removal procedure.