Removal and Installation of Air Conditioner Belt

[8] Open the shoe (2) to the rear.

[9] Use a wrench (24 mm) to remove the 5 bolts (10), 5 spring washers and 5 washers, and then remove the cover (11). •Use a wrench (19 mm) to remove the bolt (12), then install the eyebolt and lift up.

[10]Use a wrench (36 mm) to remove the drain hose (13). •Be sure to use plugs on the removed drain and high-pressure hoses. [11]Use a hexagon wrench (10 mm) to remove the hexagon bolts, and then remove the 2 highpressure hoses (14).

[12]Use a wrench (19 mm) to remove the pilot hose (15) and elbow (16) shown in the diagram.

[13]Attach the wire rope (17) to the travel motor (18) as in the diagram. •Adjust the wire rope so that it is located at the center of mass and lift it with the liftcrane so that it is slightly tensed.

[14]Use a box wrench (36 mm) to remove all 32 bolts (19).