Removal and Installation of Alternator Belt

[15]Remove the travel motor (20).

2.Installation of travel motor [1] Attach the travel motor to the lower frame as in the diagram. •Be careful of the installation angles.

[2] Apply Loctite #262 to the installation bolt (2) threaded sections and temporarily tighten them all. •Tighten top and bottom alternately to the specified torque so that an even tightening force acts on opposing corners as shown in the diagram below.

[3] Use a wrench (19 mm) to install the elbow (3) and pilot hose (4) shown in the diagram.