Procedures for Removal and Installation of Cab Inner and Outer Parts Removal and Installation of Wiper Controller Items to prepare
AL
• Wrench (10 mm) • Box wrenches (10 mm, 13 mm) • Phillips screwdriver • Flathead screwdriver
TE RN
1. Removal of wiper controller
CO US N F E ID O E F N TS TI M AL GL : F O OR BA T L H
E
IN
[1] Use the Phillips screwdriver to remove the 2 installation screws (2) for the side upper trim (1).
[2] Lift the side upper trim (1), remove the connectors (3), and then remove the side upper trim. Some models have no connector.
[3] Use a box wrench (13 mm) to remove the 2 turn clips (4) and the 4 bolts (5), and then remove the side rear cover (6).
388
WSM-13-17-005EN 11
