Attachments Removal and Installation of Arm Cylinder
TE RN
AL
・ Stop the machine on a level location with good footing. ・ Be sure to stop the engine before beginning work. ・ When working together with others, always be sure to exchange signals and pay adequate attention to safety. Caution ・ Always wear protective devices (protective eyewear and safety shoes, etc.) when working with a hammer. ・ Be sure to inspect the nylon sling and other lifting equipment before beginning work. ・ Do not stand or pass under the suspended load.
Items to prepare
IN
• Wrenches (17 mm, 30 mm) • Hexagon wrench (14 mm) • Nylon sling (with the required lifting capacity)
CO US N F E ID O E F N TS TI M AL GL : F O OR BA T L H
E
• Liftcrane (with the required lifting capacity) • Cap • Plug • Hammer • Striking rod
• Grease • Rag • Cleaning fluid • Crosstie • Wire
1. Removal of arm cylinder
[1] Use a liftcrane and nylon sling (1) to secure the arm cylinder (2).
WSM-13-15-018EN
329 10
