Control Valve Assembly and Disassembly Section
SH700-5
Control Valve Removal and Installation of Control Valve ・ Keep away from fire. Warning ・ Be sure to release hydraulic pressure before beginning work.
Items to prepare
• Eyebolts (M16) × 2 • Shackles (with the required lifting capacity) × 2
CO US N F E ID O E F N TS TI M AL GL : F O OR BA T L H
E
• Wire rope (with the required lifting capacity) • Liftcrane (with the required lifting capacity) • Marking pen
IN
• Wrenches (7 mm, 17 mm, 19 mm, 22 mm, 24 mm, 30 mm) • Hexagon wrenches (10 mm, 12 mm) • Wire cutters
TE RN
AL
・ Be sure to stop the engine before beginning work. Caution ・ Be sure to inspect the wire rope and other lifting equipment before beginning work. ・ Do not stand or pass under the suspended load.
• Cap • Plug • Rag
• Cleaning fluid • Wood planks, etc.
1. Removal of control valve
[1] Extend the attachment and bring in contact with the ground.
[2] Drain the oil from the hydraulic oil tank. (For details, see "Draining Oil from Hydraulic Oil Tank".)
246
WSM-13-11-005EN 1
