Hydraulic Pump Assembly and Disassembly Section
SH700-5
Hydraulic Pump Removal and Installation of Hydraulic Pump Warning ・ Be sure to release hydraulic pressure before beginning work.
AL
・ Be sure to stop the engine before beginning work. Caution ・ Be sure to inspect the wire rope and other lifting equipment before beginning work. ・ Do not stand or pass under the suspended load.
TE RN
Items to prepare • Wrenches (17 mm, 19 mm, 27 mm, 36 mm) • Hexagon wrenches (8 mm, 10 mm, 14 mm) • Nylon sling (with the required breaking load) • Liftcrane (with the required lifting capacity)
E
IN
• Marking pen • Cap • Plug
CO US N F E ID O E F N TS TI M AL GL : F O OR BA T L H
• Rag • Cleaning fluid • Wood planks, etc.
1. Removal of hydraulic pump
[1] Use a wrench (19 mm) to remove the 8 bolts (1), and then remove the under covers (2) (3). • Remove the under covers (2) → (3) in that order.
[2] Remove the engine hood. For the procedure, see "Removal Procedure of Engine Hood". [3] Use a wrench (19 mm) to remove the 6 bolts (4) and 6 washers from the top cover.
165
WSM-13-09-005EN 1
