Counterweight Assembly and Disassembly Section
SH700-5
Counterweight Removal and Installation of Counterweight
AL
・ Be sure to stop the engine before beginning work. ・ Be sure to inspect the wire rope and other lifting equipment before beginning work. Caution ・ Do not stand or pass under the suspended load. ・ Thoroughly secure the removed counterweight with the wire ropes and liftcrane so that it does not fall over.
TE RN
Items to prepare • Box wrench (65 mm) • Balance lifting device • Shackles (with the required lifting capacity) × 4 • Wire ropes (with the required breaking load) × 4
IN
• Liftcrane (with the required lifting capacity) • Wood planks, etc. • Rag
E
• Cleaning fluid
CO US N F E ID O E F N TS TI M AL GL : F O OR BA T L H
1. Removal of counterweight
[1] Connect the hooks (1) to the shackles (2), and then use the wire ropes (3) and liftcrane to secure the counterweight so that it does not fall during removal and installation operations.
[2] Use a box wrench (65 mm) to remove the 4 bolts (4) and washers (5) on the counterweight.
159
WSM-13-08-005EN 1
