Center Joint Assembly and Disassembly Section
SH700-5
Center Joint Removal and Installation of Center Joint ・ Be sure to stop the engine before beginning work. Caution ・ Be sure to inspect the wire rope and other lifting equipment before beginning work. ・ Do not stand or pass under the suspended load.
AL
Items to prepare
TE RN
• Wrenches (19 mm, 24 mm, 36 mm) • Hexagon wrenches (5 mm, 12 mm) • Box wrenches (19 mm, 24 mm) • Specialty adapter for vacuum pump connection • Vacuum pump (vacuum pump power supply)
IN
• Extension cable • Marking pen • Cap
CO US N F E ID O E F N TS TI M AL GL : F O OR BA T L H
E
• Plug • Wire rope (with the required breaking load) • Liftcrane (with the required lifting capacity) • Wood planks, etc. • Rag • Cleaning fluid
1. Removal of center joint
[1] Use a hexagon wrench (5 mm) to remove the 4 bolts (1), and then remove the air breather (2) on the hydraulic oil tank.
152
WSM-13-07-005EN 1
