Travel Unit
E
CO US N F E ID O E F N TS TI M AL GL : F O OR BA T L H
q. Spool assembly (2-2) attachment Attach the spool assembly (2-2) to the base plate (2-1).
IN
TE RN
AL
p. Check valve (2-19) attachment Attach the check valves (2-19), then the springs (2-20) to the holes on the side of the cap assembly (2-6) mounting holes on the base plate (2-1), check that the O-rings (2-22) are mounted on the plugs (2-21), then tighten the plugs (2-21) to the specified torque.
Caution:
• Attach the spool assembly (2-2) slowly while rotating it. • Attach the spool assembly (2-2) straight. • If the spool assembly (2-2) becomes stuck, do not force it too much and lightly strike it with a plastic hammer. • Apply hydraulic oil to the outer circumference of the spool assembly (2-2), then attach it.
54
WSM-13-02-005EN 49
