Track Shoe
IN
CO US N F E ID O E F N TS TI M AL GL : F O OR BA T L H
E
[5] Tighten the check valve (8). While monitoring the track shoe tension, inject grease into the grease cylinder.
TE RN
AL
[4] Insert the master pin (7). Insert the S-pin (6) and bend it so that it cannot slip out.
[6] To adjust the track shoe tension, raise the lower side frame as shown in the diagram. Adjust the tension so that the distance indicated with A between the frame bottom (9) of the center area of the lower side frame and the lowest hanging part of the top of the shoe plate (10) is 410 - 430 mm.
WSM-13-01-005EN
4 4
