8 Driving and transportation
8 Driving and transportation 8.2 Transport position with ISOBUS Terminal
8.2 Transport position with ISOBUS Terminal Danger! Nobody should be in the danger area when the machine is switched on. There is a danger of injury from moving machine components. – Always make sure that there is adequate space around the machine. – Make sure no-one is in the area of danger! If necessary: – Actuate a “Soft Key” on the terminal to stop the automatic sequence. – Turn off the PTO shaft immediately. – Switch the hydraulic control for connection of the machine to neutral! Always work on the machine with the engine switched off. – Switch off engine. – Remove the ignition key. Note! For further information concerning operation of the terminal – see Operation – ISOBUS Terminal from page 31.
• Observe General information, page 74. • Starting the control programme, see page 43. Note! The transport position is reached automatically by ending the process “Loading” and “Unloading” The machine can also be moved to the transport position manually. To carry out the corresponding function see Manual mode “Loading”, see page 63 or Manual mode “Unloading”, see page 67.
000 295 387 0 - Erg BA QUANTUM 6800 S / P
19
