Data field symbols

D

S

S1

P 9

10

11 10.2.7 Data field symbols Symbol (D): Status articulated drawbar

• The arrows above and below the drawbar indicate the direction of movement of the front wagon: Lift the front wagon = lower the articulated drawbar Lower the front wagon = lift the articulated drawbar

(Fig. 9)

Symbol (S): Status knife frame

• The symbol indicates whether the knife frame is open or closed. • If the knife frame is open, an additional symbol (S1) “knife frame open” appears in the status bar. Opening the knife frame Closing knife frame.

(Fig. 10)

Symbol (P): Status Pickup

• The black / white (inverted) symbol indicates that the pickup is active. In addition, the movement of the pickup is also indicated by arrows: Lifting the pickup Pickup lowered into the float position

(Fig. 11)

M

Loading

M

M2

Unloading M1

12 Symbol (M): Torque display

• The black bar shows the current torque of the

PTO shaft in percentage of the maximum permissible torque. • The vertical mark (M1, M2) indicates the threshold value at which the floor conveyor is automatically switched on and off. – Illustration 12 = Loading – Illustration 13 = Unloading (without function at the moment) (Fig. 12, 13)

T 13

Symbol (T): Daily recorder

• The adjacent number indicates the current number of full wagon loads for the active order. (Fig. 14)

I 14

Symbol (I): Messages

• The symbol indicates to the user that the machine is full or if the PTO shaft needs to be switched on. Machine full

(Fig. 15)

15

I

I

PTO shaft on (Symbol (I) flashes bottom right) Significance: Switch on the power take-off. For further information – see Starting the automatic mode “Unloading” , page 85. (Fig. 16)

16

PTO shaft on (symbol (I) flashing in the centre of the data field) Significance: Disengage the PTO shaft For further information – see Starting the automatic mode “Unloading” , page 85. (Fig. 17)

17

Symbol (L): Status of the steering axle

Steering axle unlocked Steering axle locked (Fig. 18, 19)

L

18

L

19

Z

F

K

Loading

K

Unloading Symbol (Z): PTO speed

• The adjacent figure indicates the current PTO shaft speed. (Fig. 20)

20

Symbol (F): Fill level indicator (optional equipment)

• The black bar indicates the current filling level of the machine in percentage. (Fig. 21)

21

22

23 Symbol (K): Status floor conveyor

• The off / on switching of the floor conveyor drive takes place in automatic mode via the torque threshold value of the PTO shaft or via the sensor of the Metal Top (cover plate). • The figures or the letter on the right next to the symbol indicates the current set floor conveyor speed. • 1 – 20 = Speed stage • S = Rapid unloading The direction of rotation of the floor conveyor is indicated by an arrow: no arrow = floor conveyor drive off = Floor conveyor drive on, direction of rotation to the rear = Floor conveyor drive on, direction of rotation to the front (reversing) – Illustration 22 = Loading – Illustration 23 = Unloading (Fig. 22, 23)

H Symbol (H): Status Tailgate

• The symbol indicates that the tailgate is open or not interlocked. (Fig. 24)

B 24

Symbol (W): Status Shredder Drums

• The black / white (inverted) symbol indicates that the shredder drums are active. (Fig. 24)

W

25

Symbol (B): Status loading area lighting

• The symbol indicates that the loading area lighting and the additional lighting on the mudwings is switched on. (Fig. 26)

Q 26

27 Symbol (Q): Status cross conveyor

• The symbol indicates that unloading takes place with a cross conveyor. The tailgate can no longer be moved. • The arrow and letter arranged above indicate the set direction of rotation. • + R = Unloading to the right • + L = Unloading to the left (Fig. 27)