6 Carry out before each start-up
6 Carry out before each start-up
6 Carry out before each start-up Danger! The drive and the engine must always be switched off when working on the machine. – Switch off engine. – Remove the ignition key. 1. Check the working sequence in accordance with the Operator's Manual for the machine Section “Carry out before initial commissioning”. 2. Check the working sequence in accordance with the Operator's Manual for the machine Section “Prior to operation”. 3. Setting the articulated drawbar in accordance with the Operator's Manual for the machine Section “Checking the articulated drawbar”. 4. Make sure no-one is in the area of danger; immediately switch off the machine if any person approaches the area of danger. 5. Never leave the machine running unattended. 6. Switch the machine on only when it is in working position and at idle speed. Observe the maximum PTO speed.
000 295 387 0 - Erg BA QUANTUM 6800 S / P
13
