OPERATING INSTRUCTIONS
F106.7/F106.7A/F156.7/F156.7A Securing the machine
2905385.00-en
Securing the machine Work on the working equipment may only be carried out after the machine has been secured as described in the section “Securing the machine”.
Risk of injury The machine must not be started by unauthorised persons. For this reason, secure the machine.
Selecting the working equipment The machine can be fitted with a variety of working equipment. The working equipment components are assembled with hydraulic cylinders and connectors. The components can be combined in a variety of ways so that the working equipment can be best adapted to the specific task. Operate the machine only with equipment and component combinations approved for this machine. Only install and operate equipment from other manufacturers which falls under EC Machine Directive 89/392 EEC if the following are available: - Manufacturer’s declaration of conformity - Declaration of compatibility for the machine
Secure the machine as described below: • Before carrying out any servicing or repair work on the machine • Before fitting or changing the working equipment • Park the machine on firm and level ground. • Lower the working equipment to the ground. • Apply the parking brake. Do not shut off the engine out of full load, but rather let it run at idle for another three to five minutes to reduce the temperature. • Shut off the engine. • Withdraw the key from the key-switch of the electrical system. • Depressurise the hydraulic system. • Lock the articulated joint. • Secure open hood. • Secure the machine from rolling away by placing chocks under the wheels. • Disconnect batteries electrical system.
before
work
on
the
• When doing welding work on the machine, observe the section “Welding operations, safety instructions”.
107
