Combination instrument configuration menu

Combination instrument configuration menu

40001353.00-en

The change model screen (1)

can be selected in the configuration screen (1, Fig. 2) and called up with the ENTER key (Fig. 3).

Fig. 1

The configuration screen (7)

can be selected by scrolling and called up by using ENTER (7, Fig. 1).

Fig. 3

Change model message

1 Change model 2 Confirmation

Pressing the ENTER key activates the model selection screen (Fig. 4)

Fig. 2

Configuration

1 Change model 2 Tire selection 3 Transmission calibration 4 Fan test 5 Special screen

Fig. 4

The respective model is selected with the arrow keys and the selection confirmed with the ENTER key. After selecting the model in screen (Fig. 4), the following screen (Fig. 5) is displayed.

OPERATING INSTRUCTIONS F106.7/F106.7A/F156.7/F156.7A

Fig. 5

Change model

1 Change model OK 2 Restart (Model change/select screen) 3 of the machine

Turn ignition key to “0”. After the “shutoff delay” has elapsed, turn the ignition switch back to “I” (Fig. 6). The model change concerns only the display of the model name in the main screen. No model-specific parameters are loaded.

Fig. 7

Tires

1 Tire selection 2 Tire radius

A press on the ESCAPE key displays the configuration screen again.

The transmission calibration screen (3)

is selected (3, Fig. 2) and called up with the ENTER key (Fig. 8).

Fig. 6 A press on the ESCAPE key displays the configuration screen again.

The tires screen (2)

is selected (2, Fig. 2) with the arrow key and called up with the ENTER key (Fig. 7).

Fig. 8 The menu on the configuration screen follows. If the queried conditions do not apply, continue to follow the menu on the the configuration screen. If the queried conditions do apply, start the configuration. After the end of the process, confirm OK with ENTER. If the process could not be successfully carried out, leave the menu with the ESCAPE key.