Rotary beacon (option

Rotary beacon (option)

40001358.00-en

Press the lever (21, Fig. 16) and remove the cover (22).

Fig. 16 Remove the lamp (23, Fig. 17) and replace with a new one.

Fig. 17 Replace the cover (22). Press the lever (21) and snap on the cover (22) until it audibly engages.

Rotary beacon, replacing the reflector

Remove the cover (22) as described above. Remove hook (24, Fig. 18) with the help of small pliers. The reflector and motor (25) can now be removed completely.

Fig. 18 Install a new reflector with motor (25). Refit hook (24) and put cover (22) back in place.

Retrofitting a rotary beacon

The rotary beacon is fixed with 4 screws (1, Fig. 19) at the rear of the cab roof on the right. The beacon is connected to the power supply by means of the prefabricated cable with connector (2, Fig. 19).

Fig. 19