Template Name: OML_2_col Template Date: 1994_04_22
907871 Alt= to hide template information Alt+ to display template information
519 Telehandler
ENGINE
STEP 43
STEP 45 See the Operator’s Manual for the specified hydraulic fluid, engine coolant and correct levels. Fill the hydraulic reservoir with the specified oil. Fill the radiator and engine block with the specified coolant. Bleed the fuel system by following the procedures in the Service / As Required section of the Engine Operation and Maintenance Manual. G0707005
Install the radiator cover. Complete Steps 11 and 12 of Section 800 for the correct procedure.
STEP 44
STEP 46 Start the engine and run until the coolant has reached operating temperature. Adjust the throttle cable linkage until the engine speed is 1100 RPM at low idle and 2700 to 2800 RPM at high idle.
STEP 47 Check the hydraulic functions for proper operation. Shut off the engine and check for leaks and correct fluid levels.
G0607021
Install the engine cover. Complete Steps 4 through 6 of Section 800 for the correct procedure.
913302
201-18
PRINTED IN U.S.A.
