2. SAFETY PRECAUTIONS 2. 1 FOR SAFETY OPERATIONS NO MODIFICATION ! • Do not attempt to modify or disassemble the Transmitter and Receiver, or the accessories, which may cause an electrical shock or a fire.
HOLDING THE TRANSMITTER • The Transmitter is designed for one hand controls in general. Refer to the figure in the right for basic usage of the Transmitter. Levers and buttons can be manipulated by the thumb, while the Accelerator lever can be triggered by the forefinger. Other fingers should grab the grip to hold the Transmitter.
• Always manipulate levers and switches by fingers. Do not attempt to operate it by any other method such as a screwdriver etc. It may make a hole in the Transmitter which allows water to enter inside the body causing problems or failures which could cause a serious hazard.
NO WATER WASHING • Always keep the Transmitter unsoiled, and clean it when necessary. Oil or mud on surface may cause miss-operation with slipping hands, which may result a serious hazard. • Do not attempt to wash the transmitter with water, in any event. It allows water to enter inside and causes problems or failures and could cause a serious hazard. • Scrub the Transmitter and Receiver with a damp water cloth or diluted detergent to remove the dart. Avoid alkaline or alcoholic cleaners or sprayer cleaners which deteriorate plastics and produce cracks.
6-4
