[1] TASKS TO BE PERFORMED AFTER STARTING THE ENGINE • Avoid using the Outrigger collective setting switch in a condition where installation height of each outrigger is different. Its use may make the machine significantly inclined or overturn. • When stowing outriggers, be careful to avoid your body or clothes being trapped between outriggers and the machine body.
CAUTION When 4 outriggers are installed equally at the same height, use the Outrigger collective setting switch. It facilitates smooth elevation of the machine. 1. See “Operation 2.2 Starting the Engine” and start the engine. 2. Turn the acceleration lever to right to change the engine speed to below medium speed.
When 4 outriggers are installed equally in the same height, operate the ourtigger collecvtive setting switch as below:
CAUTION On level ground, use the Outrigger collective setting switch to retract 4 outriggers all at once. It facilitates smooth lowering of the machine to the ground. 3. Open the outrigger switch cover and turn the Outrigger collective setting switch (16) upward to the IN position. Outrigger cylinders start retracting and the machine is lowered. Continue this operation until the rubber tracks stand firmly on the ground.
3-86
