2.2.2 STARTING THE ENGINE WITH AUXILIARY STARTER SWITCH
CAUTION • To start the engine with the auxiliary starter switch, make sure that the main starter switich is in ON position. • Do not keep the starter turned for more than 5 seconds. Doing so will accelerate the battery discharge. Wait for about 1 minute before attempting to start the engine again if it did not start. •Even in normal temperature, pull the choke knob before starting the engine, as a rule. • Verify that the fuel lever of the water separator pot is at the vertical position (open) before starting the engine. •Make sure that the engine emergency stop switch is in OFF position. The engine does not start when it is "ON". • Verify that the main switch on the remote control receiver is at the OFF position. 1. Insert the key into the main starter switch and turn the key to the ON position.
2. Pull the choke knob toward you.
3. Move forward to the Crane Operation Unit. 4. Turn the acceleration lever toward left to operate the engine at medium speed (lever stroke about midway).
5. Push up the auxiliary starter switch to the “START” position (upward).
6. Release your finger from the auxiliary starter switch once the engine has started. The auxiliary starter switch will automatically return to the NEUTRAL position.
3-56
