Route Management Manual To Use the Training Tool Figure 66. Raymond Courier with Training Lasers
Appendix A: Laser Training Tool
Best Practice We have found it can be difficult to set the lasers up perfectly square to the truck when at the installation site. If the lasers are not square during training, the Raymond Courier will not be square, which may cause issues with starting the Raymond Courier at these locations. Setting the laser 9” in front of the field, will allow the user to program the Raymond Courier correctly, and will take into account the 6” of “truck following” tolerance, plus 3” for “training tolerance”.
1134254B, Revised: 30 Sep 2016
125
