Appendix A: Laser Training Tool

To assist the operators with the trai ning of the Raymond Couriers, a Laser Training Tool was developed. This tool can be mounted on a truck and set to project a laser line an adjustable distance from the truck.

This Laser Assembly uses a Class IIIB moderate power laser (cw: 5-500 mW, pulsed: 10 J/cm2 or the diffuse reflection limit, whichever is lower). In general Class IIIB lasers will not be a fire hazard, nor are they generally capable of producing a hazardous diffuse reflection, however specific controls are recommended. Eye protection should be worn. Pe rsons unnecessary to the laser operation should be kept away. Direct exposure on the eye by a beam of laser light should always be avoided with any laser, no matter how low the power.

For more details about lasers and laser hazards, refer to the OSHA website: https://www.osha.gov/dts/ost a/otm/otm_iii/otm_iii_6.html

To Purchase the Laser Training Tool

Raymond does not sell the laser training tool directly. The laser training tool must be purchased from the following supplier:

Laser Training Tool Assembly Part Number: 1183326

Manufacture: Kaman Industrial Technologies Corporation

Recommended Quantity: 5

Subassembly Parts:

BB2AA is the battery case w/ Velcro and connector

AGLL2 is the laser with connector

NL-80-300 is the magnetic base and clamp assembly

Kaman Industrial Technologies Corporation

423 Commerce Road

Vestal NY 13850

O: 607.729.1730 F: 607.729.1743 email: binp01-kit@kaman.com