In-Vehicle Service Procedures How to Install the Oil Seal Mechanical/Magnetic Speedometer Special Instructions To prevent oil leaks, do not touch the seal lip, and make sure the seal driver is clean.
Special Tools •
Seal Driver Eaton K-2413
•
Torque Wrench 500 lb. ft. capacity
Procedure 1.
Place a seal on the oil seal driver (Eaton # K-2413), and drive the new seal into the rear bearing cover. The seal is fully installed when the flange on the seal is flush with the shoulder in the bore.
2.
Install the new slinger on speedometer rotor/seal sleeve using a slinger driver.
1
2
88
