hronizer AssemblyHow to Disassemble the Sync

How to Disassemble the Synchronizer Assembly

Special Instructions

Place the synchronizer assembly on a clean, flat surface. Cover the synchronizer assembly with a shop rag to prevent losing the three (3) springs under pressure from the HI range synchronizer pin locations.

Special Tools

• Typical service tools

Spring Sliding Clutch

Synchronizer LO

Synchronizer HI

Procedure -

1. Place the larger LO range synchronizer ring on the bench.

2. Cover the synchronizer with a shop rag to contain the springs.

3. Grab both sides of the HI range synchronizer and pull.

4. From the synchronizer ring LO range pins, remove the sliding clutch.