How to Assemble the Auxiliary Section How to Install the Rear Auxiliary Drive Gear Special Instructions None
Special Tools •
Typical Service Tools
•
A vise with brass jaws or wood blocks
•
Output yoke and breaker bar
Procedure 1.
Temporarily install the output yoke.
2.
To keep the output shaft from turning, insert and hold the breaker bar.
3.
Tighten the auxiliary drive gear retainer bolt to 90-120 lb-ft of torque. Remove the breaker bar and output yoke.
Final Check •
157
Make sure the auxiliary drive gear retainer bolt is properly torqued.
