How to Disassemble the Output Shaft Assembly

When using the soft bar and maul on the output shaft, be careful not to damage the threads.

When removing the rear bearing cover, the rear bearing cone drops from the housing bore.

• Typical Service Tools • Vise with brass jaws or wood blocks • Press • Soft bar and a maul

1. Use a soft bar and maul to drive the output shaft forward and through the rear bearing assembly.

2. From the auxiliary housing rear, remove the rear bearing retaining capscrews, cover, and gasket.

3. Clean the gasket mounting surface of gasket material.

4. Inspect the rear bearing cover oil seal for damage, remove if damaged.

5. From the auxiliary housing rear, remove the bearing cup and spacer.

6. From the auxiliary housing front, remove the remaining bearing cup.

7. From the output shaft, remove the bearing inner spacer.

8. Use the output shaft assemble gear front face as a base, press the output shaft through the bearing and gear.