How to Disassemble the Splitter Cylinder Assembly

When removing the splitter cylinder cover insert valve, note the direction the insert valve was positioned (nipple in or out).

• Typical Service Tools • A vise with brass jaws or wood blocks

1. From the splitter cylinder cover, remove the capscrews, cover, and gasket.

2. Clean the gasket mounting surface of gasket material.

3. From the cylinder housing, remove the yoke bar.

4. From the auxiliary housing, remove the splitter cylinder housing.

5. From the splitter cylinder cover, remove the insert valve retaining nut and insert valve.

6. Inspect the insert valve and the cover bore for damage.

7. Inspect the yoke bar O-ring; remove if necessary.

8. Inside the cylinder housing bore; inspect the small 0-ring, remove if damaged.