Transmission Overhaul Procedures-Bench Service How to Remove Output Yoke Special Instructions None
Special Tools •
Output Yoke Puller (Tool ref. ID T1)
1.
Remove the speedometer sensor retaining capscrew and the speedometer sensor from the rear bearing cover.
2.
Remove the output nut using a 70 mm or 2 3/4" socket.
Transmission Overhaul Procedures-Bench Service
Procedure -
TIP:To prevent the output shaft and yoke from rotating while removing the nut, use a fixture to hold the yoke.
3.
Remove the output yoke. Use the output yoke puller (Tool ref. ID T1).
4.
Remove the speedometer rotor and O-ring from the output shaft.
76
