1 minute read

How to Install Output Bearing Cover

Next Article
How to Assemble and Install Front Countershaft Assembly

How to Assemble and Install Front Countershaft Assembly

Special Instructions

None

Special Tools

• Typical Service Tools

Procedure -

1. Thoroughly clean and inspect the sealing surfaces on the transmission case and the output bearing cover for gouges or distortion. Replace if necessary.

2. Apply RTV sealant per application guidelines to the transmission case.

3. Place the bearing cover on the case in the same orientation as removed.

4. Install the six bearing cover retaining capscrews. Tighten capscrews to 47-52 lb-ft (63-70 Nm).

More articles from this publication:
This article is from:

Eaton Fuller Heavy Duty FRLO-16410C Transmissions TRSM0580 Service Manual - PDF DOWNLOAD