1 minute read
RTV Sealant Application Procedures
1. Clean and remove all foreign material from surfaces to be sealed. 2. Use solvent to prep surface before application. 3. Use the precut applicator nozzle to apply a continuous and even 1/8” bead to one of the surfaces to be assembled. 4. Apply the sealant bead inboard of all capscrew holes. 5. Parts must be assembled with 10 minutes of application, maximum RTV cure is achieved after 90 minutes. 6. Reference bead paths shown below for exact location for applying sealant. 7. Follow assembly instructions and torque specifications shown in the Lightning Series Manual. Eaton literature # TRSM0580
