In-Vehicle Service Procedures How to Remove the Output Bearing Cover Special Instructions None
Special Tools •
Typical Service Tools In-Vehicle Service Procedures
Procedure 1.
Disconnect the driveshaft and universal joint from the output yoke according to OEM or driveshaft manufacturer's instructions.
2.
Drain the transmission oil.
3.
Shift the transmission into 1st gear or low gear to prevent the output yoke from turning when you loosen the output yoke nut.
4.
Remove the output yoke nut using a 70 mm or 2 3/4" socket.
5.
Remove the output yoke. Use an output yoke puller (Tool ref. ID T1).
6.
Remove the speedometer sensor from the rear bearing cover.
7.
Remove the six bearing cover capscrews.
54
