Transmission Overhaul Procedures-Bench Service How to Install Output Bearing Cover Special Instructions None
Special Tools •
Typical Service Tools
1.
Thoroughly clean and inspect the sealing surfaces on the transmission case and the output bearing cover for gouges or distortion. Replace if necessary.
2.
Apply RTV sealant per application guidelines to the transmission case.
3.
Place the bearing cover on the case in the same orientation as removed.
4.
Install the six bearing cover retaining capscrews. Tighten capscrews to 47-52 lb-ft (63-70 Nm).
Transmission Overhaul Procedures-Bench Service
Procedure -
128
