Transmission Overhaul Procedures-Bench Service How to Assemble and Install Reverse Idler Special Instructions None
Special Tools •
Typical Service Tools
2 1
4
3
5 6
1. Reverse Idler Shaft 2. Reverse Idler Gear 3. Bearing
4. Washer 5. Snap Ring 6. Capscrew
Procedure 1.
Install the snap rings on the reverse idler shafts.
2.
Install two (2) caged needle bearings in each reverse idler gear.
3.
Install the reverse idler gears between the mounting forks with the large end of the gear facing up as shown. Note: The internal cooler is made with a clearance slot for the lower (right side) idler gear.
119
