Phone
Bluetooth® Compatibility You can use your Bluetooth-capable phone hands-free in Model X provided your phone is within operating range. Although Bluetooth typically supports wireless communication over distances of up to approximately 30 feet (9 meters), performance can vary based on the phone you are using.
When paired, Model X automatically connects to the phone, and the touchscreen displays the Bluetooth symbol next to the phone’s name to show that the connection is active.
Importing Contacts and Recent Calls
Before using your phone with Model X, you must pair it. Pairing sets up Model X to work with your Bluetooth-capable phone (see Pairing a Bluetooth Phone on page 136).
Once paired, you can use the Bluetooth settings screen (touch the Bluetooth icon on the touchscreen's status bar) to specify whether you want to allow access to your phone’s contacts and recent calls.
You can pair up to ten Bluetooth phones. Model X always automatically connects to the last phone that was used (provided it is within range). If you want to connect to a different phone, see Connecting to a Paired Phone on page 137.
If access is turned on, you can see your list of contacts and recent calls on the Model X touchscreen. Touch Phone > Contacts. You can then touch a contact to dial its phone number or navigate to its address.
Note: On many phones, Bluetooth turns off if the phone’s battery is low. Note: In addition to phones, you can also pair Bluetooth-enabled devices with Model X. For example, you can pair an iPod Touch or an iPad or Android tablet to stream music.
Pairing a Bluetooth Phone Pairing sets up Model X to work with your Bluetooth-capable phone. Once a phone is paired, Model X can connect to it whenever the phone is within range.
Note: Before contacts can be imported, you may need to either set your phone to allow syncing, or respond to a popup on your phone to confirm that you want to sync contacts. This varies depending on the type of phone you are using. For details, refer to the owner documentation provided with your phone. If access is turned on, imported information is displayed when you touch the contacts tab on the Phone app. Note: For security reasons, erase your contacts if you sell Model X (see Erasing Personal Data on page 122).
To pair a phone, follow these steps while sitting inside Model X:
Unpairing a Bluetooth Phone
1.
If you want to disconnect your phone and use it again later, simply touch Disconnect on the Bluetooth settings screen. If you do not want to use your phone with Model X again, touch Forget This Device. Once you forget a device, you need to pair it again if you want to use it with Model X (see Pairing a Bluetooth Phone on page 136).
2. 3. 4.
5.
6.
136
Ensure both the touchscreen and the phone are powered on. On the touchscreen’s status bar, touch the Bluetooth icon. On your phone, enable Bluetooth and set it to discoverable. On the Model X touchscreen, touch Start Search. The touchscreen searches then displays the list of all available Bluetooth devices within operating distance. On the Model X touchscreen, touch the phone with which you want to pair. Within a few seconds, the touchscreen displays a randomly generated number, and your phone should display the same number. Check that the number displayed on your phone matches the number displayed on the touchscreen. Then, on your phone, confirm that you want to pair.
Note: Your phone automatically disconnects whenever you leave Model X.
Model X Owner's Manual
