Changing Hydraulic Oil Filter 1. Perform the “Mandatory Safety Shutdown Procedure” on page 14. 2. Wait until the engine has cooled. 3. Open the engine compartment according to “Engine Access” on page 136. 4. Place oil pan under the machine to catch the oil. 5. Unscrew and remove hydraulic oil filter (L, Figure 105). 6. Clean the surface of the filter housing where the element seal contacts the housing. Put clean oil on the rubber gasket of the new filter (L).
L
Figure 105 – Hydraulic Oil Filter
7. Install and tighten the filter (L) 3/4 of a rotation past the point where the gasket contacts the filter head.
148
50950264/G0521
