1 minute read
General Lubrication
from Gehl RT165 RT165 (EU) RT165 X-Series Compact Track Loader Operator’s Manual 50950264 - PDF DOWNLOAD
Important: Use of lubricants not corresponding to manufacturer recommendations may invalidate warranty claims. Always dispose of waste lubrication oils and hydraulic fluids according to environmental laws or take to a recycling center for proper disposal. DO NOT pour fluids onto the ground or down a drain.
See “Fluid Capacities/Lubricants” on page187 for proper grease specifications. Wipe dirt from the fittings before and after applying grease to prevent contamination. Replace any missing or damaged fittings. Avoid excessive greasing to minimize dirt build-up.
Lubricate Daily or After Every 10 Hours of Operation
A. Front lift cylinder grease fittings (2).
B. Top lift arm grease fittings (2).
C. Back lift cylinder grease fittings (2).
D. Attachment hitch pivot points (2) – NOTE: Lubricate (D) from inside of pin.
E. Bottom tilt cylinder grease fittings (2).
F. Attachment latch pins (2).
