Loading a Bucket 1. (Figure 71) Lower the bucket to the ground. 2. Tilt the bucket slightly forward so the bucket cutting edge is pointing slightly down into the ground. 3. Drive forward until the bucket is filled with material. Adjust the bucket tilt as needed to remove an even layer of ground and to reduce tire slip. 4. Tilt the bucket back and raise it to scoop up material. 5. Reduce engine speed and back out of the material.
1
2
3
4
Figure 71 – Loading a Bucket
6. Set the bucket to transport position. See “Attachment Transport Position” on page 96.
106
50950264/D0819
