DOS Flash Utility Perform the following steps to use the DOS Flash Utility: 1.
Press F2 during boot to enter the Setup Menu.
2.
Select Boot Menu to modify the boot priority order, for example, if using USB HDD to Update BIOS, move USB HDD to position 1.
Information Main
Security
Boot
InsydeH20 Setup Utility Exit
Rev. 3.5 Item Specific Help
Boot priority order: 1. 2. 3. 3. 4. 5. 6.
F1 Help ESC Exit 3.
Use < > or < > to select a device, then press <F5> to move it down the list, or <F6> to move it up the list. Press <Esc> to escape the menu
IDE0 : WDC WD5000BEVT-22ZAT0 IDE2 : IDE1 : MATSHITADVD-RAM UJ880AS USB FDD : Network Boot : Atheros Boot Agent USB HDD : USB CDROM :
Select Item Select Menu
F5/F6 Enter
C h a n g e Va l u e s Select SubMenu
F9 F10
Setup Default Save and Exit
Execute the IFLASH.BAT batch file to update BIOS.
The flash process begins as shown.
4.
28
In flash BIOS, the message Please do not remove AC Power Source displays.
Chapter 2
