1 minute read

Removing the LCD Bezel

Next Article
Rear Assembly

Rear Assembly

1. See “Removing the LCD Module” on page 71. 2. Remove the four screw caps and screws from the LCD Bezel.

NOTE: The two center screw caps at the top of the bezel are for protection only.

3. Starting from the inside right edge, pry the bezel away from the panel. Continue moving along the top, prying the bezel away from the LCD Module. If necessary, use a plastic pry to release the corners of the bezel.

Step

Size

LCD Bezel M2*4 4

Quantity Screw Type

5. Lift up the bezel and remove it from the LCD Module.

This article is from: