Model 6210 Maintenance Manual Mast, Chain, Hose, Cable
Section 7. Component Procedures Main Mast
Adjusting Mast Guides/Dampers The mast guides may require adjustment to reduce rattles that may occur as the truck travels over floor irregularities. NOTE: Rattles may come from some other source, such as the forks or fork carriage. 1. If equipped with the optional keypad, press the red OFF ( O ) key. Place the Main ON/OFF Switch in the OFF position. Disconnect the battery connector from the truck. 2. Check the clearance between the inner telescopic mast and the bumper stop [1]. 3. If the bumper stop [1] clearance is excessive, loosen the jam nuts [5] and readjust the set screws [6]. Make sure that you adjust the clearance equally on both sides of the mast. Figure 7-86.
Mast Guide Set Screws
Publication: 1146947, Revised: 12 Jan 2017
7-83
