Model 6210

Table 3-2.Truck (Operator) Parameters

01 Max Speed0 to 40%40%This parameter controls the scaling of the throttle request. A setting of 40% corresponds to approximately 3.6 MPH.

0 to 65Defines the truck’s neutral braking characteristic when the throttle is returned to neutral. A higher number results in a less aggressive deceleration.

6: low reduction force 0: high reduction force 05Truck OFF

0 to 20

0 min.Sets the truck off delay (energy saving feature). If this amount of time passes while the tiller arm is in a brake position and the truck is idle (no outputs requested), the VM powers the truck OFF. When this parameter is set to 0, the truck never powers OFF. If parameter 39 is 1 or 2 (truck does not have an optional keypad), the truck never powers OFF. 0: never turns off 20: 20 minutes.

07Acceleration Rate 1 to 53Selects from a table for acceleration rate. A higher number results in a less aggressive acceleration. 1 = fastest, 5 = gentlest.

Publication: 1146947, Revised: 12 Jan 2017 3-11