Operating instructions
F106.6 / F106.6A / F156.6 / F156.6A
Rotary beacon (option) Depress button (21, Fig. 16) and remove the cap (22).
40001358.00-en
Rotary beacon – Replacing the reflector Withdraw the cap (22) as described above. Remove hook (24, Fig. 18) with the help of small pliers. The reflector can now be removed completely together with motor (25).
Fig. 16
Remove the lamp (23, Fig. 17) and replace by a new one. Fig. 18
Install a new reflector with motor (25). Refit hook (24) and put cap (22) back in place. Retrofitting a rotary beacon The rotary beacon is fixed with 4 screws (1, Fig. 19) at the rear of the cab roof on the right. The beacon is connected to the power supply by means of the prefabricated cable with connector (2, Fig. 19).
Fig. 17
Replace the cap (22). Depress button (21) and snap on cap (22) until it is heard to engage.
Fig.:19 3100544.00
263
