Combination menu

Combination menu

40001351.00-en

The other items of the Configuration screen (Fig. 1) can be called up after scrolling.

Configuration menu

1 Changing to another model 2 Selection of tires 3 Fan test 4 Special functions

Fig.:1 3100504.00

Hardware/Software menu

40001352.00-en

Fig.:1

The

Hardware screen

(5, Fig. 1) can be selected in the Service screen (Fig. 1) by scrolling and called up with the ENTER key .

Fig.:2

Hardware screen

1 CNH part number 2 Serial number 3 Hardware ID 4 Hardware version

The screen is of great help for ordering hardware. A press on the ESCAPE key displays again the Service/Select screen. The

Software screen

can now be selected in this menu with the arrow keys and called up with the ENTER key (6, Fig. 1).

Fig.:3

Software screen

1 CNH part number 2 Boot-loader version 3 Software ID 4 Software version

This screen is also of great help for ordering the corresponding software.

These screens are intended for information and for ordering hard- and software.

A press on the ESCAPE key displays again the Service/Select screen.

Combination instrument configuration menu

40001353.00-en

The Configuration screen (7) The Change Model screen (1)

Fig.:1 can be selected in the Service screen (Fig. 1) by scrolling and called up with the ENTER key (7, Fig. 1).

Fig.:3 can be selected in the Configuration screen, and called up with the ENTER key (1, Fig. 2).

Change model message

1 Model change 2 Confirmation

Pressing the ENTER key activates the Model selection screen (Fig. 4).

Fig.:2....3100504.00

Configuration

1 Model change 2 Tire selection 3 Fan test 4 Special functions

Fig.4:

The desired model is selected with the arrow keys and the selection confirmed with the ENTER key. After selecting the model in screen (Fig. 4), the following screen (Fig. 5) is displayed.

Fig.:6 A press on the ESCAPE key displays again the configuration screen.

The Tires screen (2)

is selected with the arrow key and called up with the ENTER key (Fig. 7)

Fig.:5

Change model

1Model change OK 2Restart (Model change/select screen) 3of the machine

Turn ignition key to "0". After the "shutoff delay" has elapsed, turn the ignition switch back to "I" (Fig. 6). The model change concerns only the display of the model name in the main screen. The change of the name does not cause model-specific parameters to be loaded.

Fig.:7

Tires

1 Tire selection 2 Tire radius