Service/Select menu

Calling up the service screens

40001316.00-en

After engine start-up or ignition shut-on, the driver or the service technician can make use of the service menu for adapting the machine configuration to the respective working conditions, for recalling possible faults or also for selecting different settings.

All settings are stored after they have been selected. After an abrupt disconnection of the battery, stored data can get lost so that the multi-function LCD display must be reprogrammed.

In every menu in which changes can be made, the active line or the active value to be changed is marked with a black bar. After pressing the ENTER key (B, Fig. 1), the line / value to be changed starts flashing. By pressing the arrow keys UP (C) and the arrow key DOWN (D), the settings can be selected and confirmed with the ENTER key (B). The change is stored. The marked line or value stops flashing. If a change is to be discarded, this can be done by pressing the break key ESCAPE (A) while the line is flashing.

Fig.:1 3100457.00 After appearance of the main menu press the entry key ENTER (B, Fig. 1) for 2 seconds to activate the service screen (Fig. 2). Press the DOWN key (D, Fig. 1) to browse through the submenus.

Fig.:2 3100487.00

Service/Select menu

1 Preferences 2 Options 3 Display 4 Time 5 Hardware information screen 6 Software information screen 7 Configuration