Operating instructions
F106.6 / F106.6A / F156.6 / F156.6A
Preserving the engine
2905869.00-en
(cf. engine operating instructions)
Recommissioning
x Clean the engine with a high-pressure cleaner.
After an immobilization of approx. 1 year, the oil must be changed in
x Run engine warm and shut off.
2905981.00-en
- the hydraulic system,
x Drain off engine oil and fill engine with rustproofing oil (cf. engine operating instructions).
- the power shift transmission,
x Drain off fuel from fuel tank.
- the rear axle
x Mix a fluid consisting of 90 % diesel fuel and 10 % rust-proofing oil and fill into the tank.
- and the blade slewing gear.
x Allow engine to run for abt.10 minutes.
After an immobilization period of less than 1 year, all oil levels must be checked. x Preserve engine in accordance with engine operating instructions. Fill in new engine oil.
x Shut off engine. x Turn engine several times by hand to allow preservation fluid to get into the cylinders and combustion chambers.
x Check acid density and battery fluid level. x Install and connect battery.
x Take off V-belt and store it well-packed.
x Check tyre pressure.
x Spray corrosion inhibitor into the grooves of the V-belt pulley.
x Remove grease from piston rods in hydraulic cylinders.
x Close suction and exhaust openings.
x Remove jacks from under machine.
x Switch on battery main switch. x Check performance of electrical system. x Release the pivot joint lock. x Check performance of braking and steering system. x Bring machine into travelling position and apply parking brake. x Vent the hydraulic system. x Carry out works according to the servicing plan V.
233
