Operating instructions
F106.6 / F106.6A / F156.6 / F156.6A
Rear ripper (option)
Read and observe: "Working operations – Safety instructions"
40001308.00-en
x Withdraw the cotter pins (4, Fig. 2) and remove retaining pin (3).
The rear ripper is equipped with up to 5 ripper teeth and can be used for heavy-duty ripping work. Use the ripping teeth only in symmetrical arrangement.
Before lowering the rear ripper, set the ballcock (4, Fig. 5) to position A.
Rear ripper – working position
Fig. 2
x Move a tooth into working position (5, Fig. 2) and fasten with retaining pin (3). Secure the retaining bolt with cotter pin (4) and safety ring (6).
x Tilt teeth protection (2, Fig. 1) backwards (Fig. 2). It is held in this position by springs.
Fig. 3
Fig. 1
103
