276 MAINTENANCE AND LUBRICATION Ethylene glycol or propylene glycol-based antifreezes are both approved for all MACK engines. All ethylene glycol and propylene glycol coolants must be low-silicate antifreezes which meet ASTM4985 test (GM6038M SPEC) criteria. These antifreezes are sometimes referred to as heavy-duty diesel coolants. Passenger car coolants do NOT meet this specification. Be sure to maintain the required level of antifreeze protection for anticipated winter temperatures in your area of operation. A 40% to 60% concentration of antifreeze is required for MP engines, regardless of application, geographic location or ambient air temperature.
CAUTION Do NOT exceed a 60% concentration of antifreeze to water. A higher percentage of antifreeze will not increase protection. Concentrations over 60% adversely affect freeze protection and heat transfer rates. Note: Propylene glycol should be checked with a refractometer. Note: ALWAYS mix the water/antifreeze solution before pouring it into the cooling system. Note: The piping arrangement may cause capacity variation depending on the type of cooling system and optional external cooling devices which may be attached. Therefore, it is difficult to tell exactly how much coolant it will take to fill any one particular system.
CAUTION Do NOT use coolant solutions which contain anti-leak additives in trucks equipped with coolant filters or conditioners.
CAUTION Do NOT use soluble oil-type coolants in any MACK cooling system.
https://www.truck-manuals.net/
