INSTRUMENTS AND CONTROLS

Caution

The maximum safe oil temperatur e for MACK transmissions 121°C (250°F) for mineral - based 148°C (300°F) for synthetic Continued operation with oil above this temperatur e will cause rapid deterioration the s lubricating operties and NOT r Consult the vendor manual for non - MACK

Integrated T emp - A - Start (Amber) (If Equipped) – T emp - Asaves fuel reducing the amount time spent idling keep the s batteries char ged, the engine the cab and sleeper Once the optional T emp - A - feature activated via a dash the system will automatically start and stop the truck Safety overrides prevent the system from activation the transmission gear , the hood up, the parking brake Integrated T emp - A - Start voltage and temperature tar get settings are fully programmable through either VCADS service support , enabled via the - Pilot instrument cluster display .

W ait Start (Amber) (If Equipped) – Indicates that the intake pre - heat enabled. W ait start engine until light goes out.

Check T ransmission Indicator (Amber) that the transmission oil temperature above the warning limit.

Board Diagnostics Indicator (Amber) - Indicates the need access the board diagnostics port for

10. Electronic Malfunction Indicator (Amber) – Illuminates when V - MAC® detects electronic malfunction. Refer the V - MAC® Operator ’ s Guide . The electronic malfunction lamp may turn when operating the vehicle a bob - tail mode with the engine brake turned and cruise control active. Cruise control will become inoperative but can reset shutting then restarting the engine. This condition can corrected resetting the Brake Fault Threshold with Engine Brake" function. Refer V - MAC® Customer Data Programming.

Note: Consult the appropriate vendor engine manual your vehicle not equipped with a MACK

1 High Beam Indicator (Blue) – Indicates that high beams are

12. Left T urn Signal Indicator (Green) – Flashes green when the left turn signal activated.

13. Parking Brake – Indicates that the parking brake https://www.truck-manuals.net/